The control head is the heart of any water conditioning system. The FLECK 2510 automatic filter control head.Taking into account your family’s water use, the Chem-Free is set up for your particular iron, sulfur or manganese problem. Professional installation and start up by Licensed Plumbing Contractor with years of experience in water conditioning.Nickel bypass valve-quickly bypasses system if ever needed.Convenient fill hole in Filter tank for easy servicing-No need to remove filter head to service unit.Maxi-Vent electronic air vent for certain relief of excess air.Heavy duty air pump for faster air turnover for optimum air pocket and iron oxidation in contact tank.Large 13” x 54” contact/aeration tank, 13″x 54″ Filter Tank.All the filter tanks have convenient fill holes for easy replenishing of the media. The Chem-Free only requires servicing every 6 to 12 months, depending on water use and water conditions. This filter backwashes itself with plain water. The mineral filter bed is now clean and ready to go into service again. When the filter tank begins to fill up with iron particles it automatically backwashes itself, washing the accumulated iron to the drain. The ferrous iron is completely oxidized and adheres to the media throughout the filter bed.(not just on the surface) This gives the tank a larger iron holding capacity than conventional iron filters. In this bed the water’s pH is raised, greatly accelerating the action of the air on the iron. The iron can then be more easily filtered.įrom the aeration /contact tank the water passes into the filter tank which contains a natural mineral media bed. The oxygen in the air starts the natural iron removal process by oxidizing the iron and causing it to come out of solution. As the water falls through the air pocket it absorbs oxygen. The air pump adds a controlled amount of air to the aeration /contact tank, forming an air pocket. The Chem-Free works on the principle of “aeration- filtration.” This iron filter features three major components: an air pump, an aeration /contact tank and a backwashable filter containing special media. This has the added benefit of neutralizing acidic (corrosive) water. The Chem-Free iron removal filter’s process raises the pH of the water, improving the efficiency of iron removal. Another advantage of the air pump is that air is introduced on the outlet side of the pressure tank, which prevents precipitated iron from building up in the pressure system. The Air Pump causes no restriction of your pipes. When they become clogged with iron, the increased back pressure on your well pump can shut off your water and damage your pump. Venturis greatly reduce the flow rate from your well. The Air Pump is a great improvement over venturis or hydrochargers for adding air to Chem-Free Iron removal systems. The Chem-Free iron filter is easy and economical to maintain There is virtually no limit on the amount of iron this filter can remove. Instead, this filter uses plain air to oxidize the iron and plain water to backwash the filter. It is safe and very economical because it requires none of the expensive or messy chemicals such as chlorine, potassium permanganate or salt which conventional iron filters use. It also removes bacterial iron, manganese and sulfur gas. It automatically removes ferrous iron, sometimes called “clear water” iron, as well as ferric iron, sometimes called “red water” iron. Once installed, the Chem-Free iron filter requires little attention. The Chem-Free iron filter eliminates iron from your water and iron problems from your life. Dishes and bathroom fixtures that glisten and sparkle. Clothing that’s clean, fresh and stain-free. Clean, crystal clear, great tasting water.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |